- Street: Shaoxing City Shengzhou City Jinting Industrial Zone Zhejiang Province
- City: Zhejiang Province
- State: California
- Country: China
- Zip/Postal Code: 31310
- Listed: February 12, 2019 7:25 am
- Expires: 20 days, 22 hours
The Flat Screen Printer need to be adjusted frequently, otherwise it is prone to errors and causes problems in operation.
First, phase adjustment of the working cycle of complete machines: strictly adjusted by the manufacturer according to the cycle phase diagrams which are designed in advance, and pinned or locked.
Second, the adjustment of the parallelism between the three layers of the guide rail, the printing plate and the working platform: Generally, the guide rail or the platform is used as the benchmark for the adjustment.
1.The platform and the guide rail should be parallel, and the squeegee plate moves along the guide rail. If the two are not parallel, the squeegee will not always touch the platform with a certain pressure, and even the gap will occur. This adjustment has been done before the machine leaves the factory.
2.The Flat Screen Printing Machine plate and the platform should be parallel, otherwise, the mesh size (distance from the bottom surface of the screen printing plate to the printing surface) is inconsistent, causing the printing pressure and the screen printing plate to be inconsistent. Therefore, the flatness of the frame itself should be guaranteed, which is generally up to the users who make specific requirements as needed.
Third, version adjustment: refers to the adjustment of the printing precision between the screen printing plate and the printed part on the screen printing machine. Height adjustment (>40mm), ward-and-backward adjustment and left and right adjustment (>20mm), horizontal angle adjustment (>3°).
Forth, squeegee adjustment:
1. Adjust the parallelism of the screen by the squeegee and the height of the ink plate by the left and right screw; the middle shaft can adjust the left and right jackscrew, the essence of which is to adjust the high and low position to the left and right of the ink plate.
2. The adjustment of the inclination angle of the scraper is generally in the range from 65°to 85° that can be chosen as needed.
3. The adjustment of the printing pressure is actually the adjustment of the position of the squeegee.
4. The length of the squeegee cannot be adjusted but generally supplied as a kit. Each kit has several different lengths available for selection. Click hotairstenter for further more information about Licheng Products.
51 total views, 1 today
Popular Ads Overall
- Buy Quality Original Dollar At Cheap Rates / WATTS APP: +17084622198 (1770 views)
- SSD SOLUTION CHEMICAL FOR CLEANING BLACK MONEY AND ACTIVATION POWDER AND MACHINE FOR SALE (1146 views)
- We give LOAN here with 3 interest rate on any amount (983 views)
- URGENT LOAN ARE YOU IN NEED CONTACT US NOW (940 views)
- Fedex Courier Gurgaon (930 views)
- ARE YOU LOOKING FOR AN URGENT LOAN (713 views)
- Fedex (658 views)
- ARE YOU LOOKING FOR URGENT LOAN OFFER APPLY NOW (621 views)
- Fedex Gurgaon (585 views)
- SSD SOLUTION CHEMICAL FOR CLEANING BLACK MONEY AND ACTIVATION POWDER (579 views)